Audio-Technica Consumer AT-LP3 Stereo Turntable (White)
$239.00
Model: AT-LP3
Condition: Unit has been in a store on display, 100% working, may not have original packaging, may be missing accesories, Full warranty as stated
Warranty: 3 Months
Condition: Unit has been in a store on display, 100% working, may not have original packaging, may be missing accesories, Full warranty as stated
Warranty: 3 Months
***DESCRIPTION BELOW MAY CONTAIN THINGS THAT ARENT SUPPLIED, ALL THATS BEING OFFERED IS TURNTABLE ITSLEF, THERE IS NO NEEDLE - HINGES FOR DUST COVER JUST WHAT YOU SEE IN THE PHOTO***
Description
Enjoy your vinyl records with your favourite audio system and the white Audio-Technica AT-LP3 Stereo Turntable. It features a built-in stereo RCA cable and a switchable preamp to connect to nearly any type of sound system. Its fully automatic operation starts the platter when the tonearm is lifted and brakes when the needle is positioned on its mount. The AT-LP3 has 33-1/3 and 45 rpm playback speeds and includes a MM cartridge, removable dust cover, and replaceable stylus.
Key Features:
- Fully automatic belt-drive turntable with 33-1/3 and 45 rpm speeds.
- Balanced straight tonearm with hydraulically damped lift control and lockable rest.
- Built-in switchable phono/line preamplifier with attached dual RCA output cable.
- Switchable preamp modes for moving magnet and moving coil cartridges.
- 5" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and diamond stylus designed for long life.
- Anti-resonance, die-cast aluminium platter with 0.16"-thick rubber mat.
- Damped base construction for reduced low-frequency feedback colouration.
Specifications
| Turntable | |
| Speeds | 33-1/3, 45 rpm |
| Motor | Fully automatic belt drive |
| Drive Mechanism | DC servo-controlled |
| Replacement Stylus | ATN91R |
| Turntable Platter | Die-cast aluminium |
| Signal to Noise Ratio | >50 dB (DIN-B) |
| Wow and Flutter | Less than 0.25% (WTD) @ 3 kHz (JIS) |
| Preamp Overall Gain | 36 dB nominal, RIAA-equalised |
| Connectors | Built-in stereo RCA cable with switchable preamp |
| Output Level | Preamp "PHONO": 1.5 to 3.6 mV nominal at 1 kHz, 2" (5 cm)/sec Preamp "LINE": 129 to 313 mV nominal at 1 kHz, 2" (5 cm)/sec |
| Headshell | 0.5" (12.7 mm) mount universal |
| Rubber Mat | 0.16" (4 mm) |
| General | |
| Power Requirement | 120 VAC, 60 Hz |
| Dimensions (W x H x D) | 17.1 x 5 x 13.8" (434 x 128 x 350 mm) |
All products carry a 12 Month Return to Base warranty unless otherwise specially noted.
